Home / Author: admin

Tiles Leveling System

Complete the laying operations using colour grout, the grout line between each tile is recommended to be at least 1.5mm wide and must be increased according to the size and type of the tiles, the area of use (floor or wall tiles, internal or external) and the stresses expected when in service. It is recommended […]

Adhesive Application

*Check the laying substrate has no cracks, it is homogeneous and mature, totally clean and flat. Maximum deviation from flatness of 1mm per 2 meters length measured. 1. First apply the adhesive onto the back of the slab with a 6mm-tile trowel and it must be spread over in one direction only. 2. At the […]

Tiles Cutting & Drilling

1. For successful cutting and drilling, lay the slab on a stable surface, flat and not flexible. A workbench with aluminium profiles is recommended for this purpose. 2. Set the cutting unit on the tile so that the references coincide with the marked lines. 3. Score one end of the slab for 5-10cm then complete […]

Recent Comments

No comments to show.




    There’s no content to show here yet.